![What is a stud conversion and why?](https://m3list.com/wp-content/uploads/2023/04/1416d-9c9155_b7e14deb7b8d4739a6b2336c9c502321mv2-3813558.png)
What is a stud conversion and why?
Curious to know how a stud conversion kit works for your car? I’ve personally ran the Motorsport Hardware stud conversion kits on all of my BMW M3’s that I’ve had from E90 to E92 to F80 M3. Motorsport Hardware also has multiple sized spacers for sale to help get that perfect fitment on your BMW M3.
They make life x10 easier when it comes to changing wheels and swapping out brake pads etc. They also give you car a track look plus you can pick the finishes of your bolts/studs. You’ll have much more thread to work with in order to place a spacer on your wheel to give your car a better fitment/more flush with your fender. Motorsport Hardware also sells spacers, which makes a great pair with their conversion kit.
Peace of mind to have much more thread to work with, along with making it easier for yourself. Take a look below on some detailed information on what they do and how they work plus a full guide in installs between written format and video format (DIY install videos)
Click here to browse parts on the Motorsport Hardware website
Discount code “M3List” saves $ at checkout!
Motorsport Hardware replaces factory lug bolts for easy wheel installation. Nose studs are ideal for aftermarket wheels or OE wheels used with wheel spacers. Make life easier for yourself and your techs.
- 12×1.5 Thread
- Made in Europe by OEM
- 10.9 Grade hardness
- Silver Zinc finish
- Allen Key insert for easy install
- 57mm Studs can accept up to a 10mm spacer
- Each kit comes complete for your vehicle (4-wheels)
*If you need different quantities, we can do that for you, email us at sales@motorsporthardware.com
Verify if you need Ball-seat or Conical-seat nuts prior to ordering
Please note that lug bolts and studs/nuts are wearable items so proper care must be practiced to ensure their longevity and service life.
If you are racing, it is good practice to replace wheel bolts studs/nuts every season or every other season based on frequency of track events.
Washing the car: when finished, drive the car around the block to remove any excess or sitting water in the lug bolt holes.
Living in snowy climates: It is good practice to apply a small amount of anti seize onto the nuts to prevent seizure.
Click here to browse parts on the Motorsport Hardware website
Discount code “M3List” saves $ at checkout!
How do you install Motorsport Hardware Studs? (With Allen key)
Parts needed:
– 5 or 5.5mm Allen (Depending on the stud) key/wrench
– Medium strength thread locker
– Socket set and Torque Wrench
Instructions:
1. Properly jack up the car and secure jack stand
2. Remove lug bolts and wheels
3. Clean wheel hub and lug holes of any debris
4. Apply 1 drop of thread locker on the short threaded side of the stud
5. Insert allen key all the way into the stud and install the stud
6. Torque the stud to 25 ft/lbs
7. Repeat steps 4-6 on the remaining studs on wheel hub
8. Install wheel
9. Torque M12 nut to factory specs or 90 ft/lbs. For M14 17mm nuts torque to factory specs or 105 ft/lbs. For M14 19mm nuts, torque to factory specs or 110 ft/lbs.
How do you install M otorsport Hardware Studs? (Without Allen key)
Parts needed
– 2 nuts that match the thread of the stud. Lug nuts can be used
– Medium strength thread locker
– Wrench set to match the size of the nut
– Socket set and Torque wrench
Instructions:
1. Properly jack up the car and secure jack stand
2. Remove lug bolts and wheels
3. Clean wheel hub and lug holes of any debris
4. Apply 1 drop of thread locker on the short threaded side of the stud
5. Thread in the stud by hand as far as it will go
6. Screw in the first nut as far down the stud as possible while leaving a few threads before the stud shoulder (unthreaded area)
7. Screw in the second nut behind the first
8. With the wrench back up the first nut against the second nut so that it is snug (but not too tight). This should be just enough that the first nut does not turn the second nut.
9. Use the torque wrench and socket to torque the stud to 25 ft/lbs
10. Use wrench to move the first stud forward to loosen. This will allow both nuts to move freely
11. Remove nuts and repeat steps for the remaining studs
12. Install wheel
13. Torque M12 nut to factory specs or 90 ft/lbs. For M14 17mm nuts torque to factory specs or 105 ft/lbs. For M14 19mm nuts, torque to factory specs or 110 ft/lbs
Removal of Motorsport Hardware studs
Parts Needed
– 2 nuts that match the thread of the stud. Lug nuts can be used
– Medium strength thread locker
– Wrench set to match the size of the nut
– Socket set and Torque wrench
Instructions:
1. Do not use the allen key to remove the stud. The torque exceeds the strength of the allen key and you will damage/strip the key before removing the stud successfully. Please refer to the “Double Nut” method for stud removal.
2. Properly jack up the car and secure jack stand
3. Remove lug nuts and wheels
4. Screw in the first nut as far down the stud as possible while leaving a few threads before the stud shoulder (unthreaded area)
5. Screw in the second nut behind the first
6. With the wrench back up the first nut against the second nut so that it is snug (But not too tight). This should be just enough that the first nut does not turn the second nut.
7. Use the wrench to move the first nut to loosen the stud.
8. Once the stud is removed, use the wrench to move the first nut forward to release the tension from the second nut.
9. Remove the nuts and continue to remaining studs
If you’re looking to purchase anything from Motorsport Hardware, you can use discount code “M3List” on their entire website to save $!
Click here to browse parts on the Motorsport Hardware website
Discount code “M3List” saves $ at checkout!