Register or log in – click “Chat” or “Email” to contact seller.
2011.75 BMW M3 Coupe (E92) | ZCP | DCT | Carbon Roof | 62k Miles | $39,900
contact: ekelsen _at_ gmail.com
Bay Area, CA · Clean title · Current California registration · Recently passed smog
I built this M3 to drive to the track, run full sessions, and drive home. It’s a 2011.75 E92 with the factory ZCP Competition Package, carbon-fiber roof, DCT, and approximately 62,000 miles. Under my ownership it’s seen both highway and track miles. Has a two-tone Fox Red and Black Novillo leather.
I stopped at bolt-on upgrades and kept the interior. You can keep it as a dual-purpose street and track car, or take it further with a stripped interior and a cage for a dedicated race build. The removed factory parts are available with the car if you want them, except for the original wheels.
The engine and DCT retain their factory software. The powertrain is stock aside from cooling and mount upgrades below and the genuine BMW M Performance exhaust.
Maintenance
I bought the car at around 50,000 miles and had the rod bearings (with BE bearings and ARP bolts) and spark plugs replaced and all fluids changed at purchase. It’s had frequent oil changes and regular maintenance since, with most service performed by Elite Performance in Burlingame. Spare throttle bodies are included.
With me as a driver the car has done 1:51 at Sonoma and 1:41 at Laguna.
Wheels, brakes and suspension
– Forged BimmerWorld 18×10 wheels in a square setup, with Michelin Pilot Sport 4S tires that have plenty of life left
– AP Racing by Essex Radi-CAL front brake kit with CP9668 calipers, 372 mm rotors
– Ferodo DS1.11 front endurance pads and Pagid RS29 rear pads. The pads are close to new, and the front pads started at 25 mm thick.
Suspension and chassis
– MCS two-way coilovers. 700/900 lb springs. Factory EDC was coded out.
– Hotchkis Sport sway bars, adjustable strut-mounted front end links, and SPL rear end links
– SPL front control arms, tension rods, and tie rod ends, plus SPL rear toe links with eccentric lockouts
– BimmerWorld solid aluminum rear subframe mounts, trailing-link bearings, rear camber-arm bearings, adjustable rear wishbones, and spherical rear guiding links
– BimmerWorld engine mounts and Powerflex Street Series differential mounts
Cooling and other equipment
– CSF triple-pass radiator, engine oil cooler, transmission cooler, and power steering cooler, plus a BimmerWorld power steering reservoir
– BMW M Performance exhaust
– Antigravity H6/Group 48 60 Ah lithium battery
– Red Schroth Quick Fit Pro four-point harnesses for both front seats
Known issues
There’s a small dent in the hood and minor paint imperfections from track use. The passenger-side restraint warning is on. The passenger seat occupancy sensor is a likely cause.
Since we’re a free service, we always appreciate your support. If M3List has helped you sell or buy a car, any donation helps us continue doing what we do. Thank you!
Please note that multiple links on our website here at M3List are affiliate links. If anything is purchased through the links, we can earn a commission. This disclosure is in agreement and guidelines with the FTC affiliate marketing.